User's Manual

BIOS Configuration 4-59
CAPTUER 4
5. If there is an EMI shield that covers the 5.25-inch drive bay you want to use,
remove it from the chassis using a tool such as a screwdriver.
6. Make you sure that jumpers of optional drive must be set correctly.
NOTES
As a hard disk drive, most optional devices’ jumpers must be set correctly to work
properly with your system. For example, if there are two drives to one E-IDE
interface cable, one drive must have master drive jumper setting, and the other drive
must have slave drive jumper setting.
If you want to install an optional drive to the 5.25 inch bay, you must use secondary