User's Manual

BIOS Configuration 4-53
CAPTUER 4
1. Remove the system cover as described in "Removing the Cover" in Chapter 5.
2. See the picture in "Mainboard Overview" in Chapter 5 to figure out the location of
the processor socket.
3. If there is a processor chip on the socket, you must remove it from the socket.
When you remove the processor, first unplug the connector from the CPU fan
connector (fan and heatsink type only) and remove the heatsink by releasing both
tabs on the heatsink that secure the heatsink to the socket.
4. Pull the ZIF handle sideways away from the socket then upward to 90-degree
angles and carefully pull the chip straight up from the socket.
5. Locate the new processor you are installing over the socket so that the notched
corner on the
Processor (pin 1) can be aligned with the blank corner on the socket. Then gently