User's Manual

CAPTUER 4
4-52 BIOS Configuration
4. Press the DIMM straight into the socket until the retaining clips snap into place
around the ends of the DIMM.
5. Replace the system cover according to the instructions in "Replacing the Cover"
in Chapter 5.
Removing a Memory Module
To remove memory modules, press the retaining clips outward simultaneously until
the DIMM disengages from the socket and then carefully remove the DIMM from
the socket.
Installing and Removing the Processor
The processor that you install must be compatible with PGA370 socket.
WARNING
The processor you want to install must have heatsink to prevent overheating. If there
is no heatsink, the processor and your mainboard can have serious damage by
overheat.
Follow the below steps to replace the existing processor with a new one.
NOTES
According to processor type, your actual process may be slightly different from one
described below.
There are two types, fan and heatsink type and heatsink type, of the processor.