User's Manual

CAPTUER 4
4-38 BIOS Configuration
install hardware options.
This chapter will be used every time you install a hardware option inside your
computer.
Removing the Cover
You need to remove the cover of your system to access its internal components.
To remove the cover, follow the below steps.
1. Turn off the computer and other peripheral devices including the monitor.
2. Disconnect all the cables include power cable from the computer.
3. To open the system cover, remove the one screw on the back panel of your
computer.
4. Slide the cover toward the rear to free it from the system and lift it off until can be
removed
completely. Set the cover aside.