User's Manual

CAPTUER 4
4-36 BIOS Configuration
Figure 4.12: Password Setting
Type the password, up to eight characters, and press <Enter> key. The password
typed now will clear the previous entered password from CMOS memory. You will
be asked to confirm the password.
Type the password again and press <Enter> key. You may also press <ESC> key to
abort the selection and not enter a password.
To disable password, just press < Enter> key when you are prompted to enter
password.
A Message " PASSWORD DISABLED" will appear to confirm the password being
disabled.
Once the password is disabled, the system will boot and you can enter Setup freely.
If you select system at Security Option in Bios Feature Setup Menu, you will be
prompted for the password every time the system is rebooted or any time you try to
enter Setup Menu. If you select Setup at Security Option in BIOS Features Setup
Menu, you will be prompted only when you try to enter Setup.
4.16 Save & Exit Setup
Figure 4.13: Save & Exit Setup