User's Manual

CAPTUER 4
4-20 BIOS Configuration
Enable Enable AC’97 Modem.
Disable Disable AC’97 Modem
Auto Set AC’97 Modem to Auto.
* IDE HDD Block Mode
The default value is Enable
Enable Enable IDE HDD Block Mode
Disable Disable IDE HDD Block Mode.
* Onboard FDC Controller
The default value is Enable
Enable Enable onboard FDC port
Disable Disable onboard FDC port
* Onboard Serial Port 1
The default value is Auto
Auto BIOS will automatically setup the port 2 address
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8
DisabledDisable onboard Serial port 2