User's Manual

CAPTUER 4
4-6 BIOS Configuration
● IDE Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hand disk form drive C to F that has been
installed in the computer.
There are three types: auto type, manual definable type and none type user type is
user-definable; Auto type which will automatically detect HDD type.
Note that the specifications of your drive must be matched with the driver table.
The hard disk will not work properly if you enter improper information for this
category.
If you select Manual type, related information will be asked to enter to the
following items.
Enter the information directly from the keyboard and press<ENTER> key.
Such information should be provided in the documentation form our hard disk
vendor or the system manufacturer.
CYLS Number of cylinders
HEADRnumber of heads
PRECOMP write precomp
LANDZONE Landing Zone
SECTORS number of sectors
# a hard disk has not been installed select NONE and press <Enter> Key
● Drive A type / Drive B type
The category identifies the types of floppy disk driver A or driver B that has been
installed in the Computer
Name No floppy driver installed
360K, 5.25 in 5.25 inch PC-type standard driver; 360K byte capacity
1.22M, 5.25 in 5.25 inch AT-type high-density drive; 1.2M byte
capacity (3.5 inch when 3 Mode is Enable)
720K, 3.5 in 3.5 inch double-side drive; 720K byte capacity
1.44M, 3.5 in 3.5 inch double-side drive; 1.44M byte capacity
2.88M, 3.5 inch3.5 inch double-side drive; 2.88M byte capacity