User's Manual

CAPTUER 4
4-84 BIOS Configuration
the display To change the display resolution and color depth, follow
these steps:
resolution or color 1. Click the Start button, point to Settings, click Control
Panel, and then
depth? double click the Display icon. Or click the right mouse button on the empty
desktop area and click Properties.
2. When the Display Properties window appears, click the Settings
tab.
3. Select the color depth from the Colors area and the resolution
from the
Screen area. Click OK.
4. If you changed color depth, the system would reboot. If you changed resolution
only, the screen will be changed to the new settings.
How do I use the old (existing) monitor that doesn’t support the factory default
display setting (SVGA mode, 800*600)?
To use the old (existing) monitor, you must start Windows in safe mode, and then set
the resolution and color depth as follows:
1. Press the power button to start your system.
2. Press and hold the F8 key until the Microsoft Windows 98 Startup Menu appears.
3. Enter the number for Safe mode, and then press ENTER.
Microsoft Windows Startup Menu
1. Normal
2. Logged (\BOOTLOG.TXT)
3. Safe mode