User's Manual

Installing and Removing Board Options and Drives 6-15
CHAPTER 6
6. Replace the system cover.
7. Turn on your system, run the Setup program, and set the date and time again.
Restore any system configuration information that was lost while replacing the
battery according to the copy made in step 1.
After Installing Options
After you install or remove drives, if necessary, be sure to run Setup program to
update the configuration of your system. See Chapter 4 for detail information.
If you installed a hard disk drive on which you want to install an operating system,
install the operating system, drivers, and application programs on the hard disk drive
using the Restore CD after running FDISK. Follow the instructions in Chapter 8.
If you installed a hard disk drive on which you want to install an operating system,
install the operating system on the hard disk drive. See "Using the Restore CD" in
Chapter 8.
If you installed new optional equipment and Windows ME is already installed in
your system, you need to have Windows ME detect it. See Windows ME manual and
the manual that came with your optional equipment for detail information.
5. Insert the new battery with the "+" side facing up into the battery socket.