User's Manual

Installing and Removing Board Options and Drives 6-7
CHAPTER 6
5. Locate the new processor you are installing over the socket so that the notched
corner on the Processor (pin 1) can be aligned with the blank corner on the
socket. Then gently push the Processor straight into the socket until its pins are
completely inserted into the holes of the Socket.
4. Pull the ZIF handle sideways away from the socket then upward to 90-degree
angles and carefully pull the chip straight up from the socket.
NOTE
If you install the processor chip in the wrong orientation, you may burn the chip
and void your warranty.