User's Manual

CHAPTER 5
5-6 Inside Your Computer
Changing the Jumpers
The jumpers are small electrical connectors that control various circuits or functions
in your system.
Jumpers are small blocks on a circuit board with two or more pins emerging from
them. To change a jumper setting, pull the plug off its pins and carefully fit it down
onto the pins indicated.
The jumpers settings in your computer are preset at the factory; however, you can
alter the functions by changing the standard settings:
● Enable or disable the password function.
● Clear the CMOS settings.
● Enable or disable the FDD write protect.
● Enable or disable the built-in display function.
JP1
J9
JP15
JP16
JP24
JP2
JP19
JP5
JP13
JP12