User's Manual

BIOS Configuration 4-19
CHAPTER 4
● Suspend Mode
The default value is Disable
● HDD Power Down
The default value is Disable
● Soft-off by PWR-BTTN
The default value is Instant-off
● Power LED in Suspend
The default value is Blinking
NA Set Modem Use IRQ to NA
3 Set Modem Use IRQ to 3
4 Set Modem Use IRQ to 4
5 Set Modem Use IRQ to 5
7 Set Modem Use IRQ to 7
9 Set Modem Use IRQ to 9
10 Set Modem Use IRQ to 10
11 Set Modem Use IRQ to 11
● MODEM Use IRQ
The default value is 4
Disable Disable SuspendModem Use IRQ to NA
1 min-1 Hour Setup the timer to enter Suspend Mode
Disable Disable SuspendModem Use IRQ to NA
1-15 mins Enable HDD Power Down mode between 1 to 15 mins
Instant Soft switch ON/OFF for POWER ON/OFF
Delay 4 Sec Soft switch ON 4 sec. For POWER OFF
Blinking Set Power LED in Suspend at Blinking mode
ON Set Power LED in Suspend at On mode
Off/Dual Set Power LED in Suspend at Off/Dual color mode