User's Manual

CHAPTER 4
4-10 BIOS Configuration
● Typematic Delay (Msec)
The default value is 250
System The can not boot and can not access to Setup page
Will be denied if the current password is not entered at
The prompt
Setup The system will boot, but access to setup will be denied if the correct
password is not entered at the prompt
6-30 Set the maximum Typematic rate from 6 chars. Per second to 30
characters. Per second
● Typematic Rate (Chars / Sec)
The default value is 6
250-1000 Set the time delay from first key to repeat the same key in to
computer
● Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
The default value is setup.
● HDD S.M.A.R.T. Capability
The default value is Disable
Enable Enable HDD S.M.A.R.T. Capability
Disable Disable HDD S.M.A.R.T. Capability
● Report No FDD For WIN95
The default value us No.
No Assign IRQ6 For FDD
Yes FDD Detect IRQ6 Automatically