User's Manual

CHAPTER 8
8-2 Using the Restore CD
follow the below steps to restore your original preinstalled software.
1. Turn on the computer.
2. Insert the Restore CD into the CD/DVD-ROM drive before your computer boots
up.
3. Restoration procedures will be started.
4. When the Microsoft Windows ME Startup Menu appears, type the number 1 or 2
and press Enter.
Microsoft Windows Startup Menu
1 RESTORE WINDOWS - WILL FORMAT HDD
2 RESTORE WINDOWS - WILL NOT FORMAT HDD
3 BOOT TO DOS PROMPT FROM CD-ROM
Enter a choice : _
5. If you select “1. RESTORE WINDOWS ME - WILL FORMAT HDD,” the
“Proceed with Format (Y/N)?” message will appear in the screen. To continue the
procedures, type Y and press Enter.
6. All data in the Restore CD will be copied to your hard disk.
7. After the restoration process is completed, remove the Restore CD from your
CD/DVD/CDRW/COMBO drive.
8. Press Enter to restart your computer.
CAUTION
If you select "1. RESTORE WINDOWS 98 - WILL FORMAT HDD," you will
lose all data in the hard disk (C:).
NOTE
To stop this restore process now, remove the Restore CD from the CD/DVD-
ROM drive and restart your computer.