User's Manual

CONFIGURING AND ADJUSTING THE DISPLAY

4. Setting up MPAA rating Mode

E. Use Up/Down/Left/Right arrow buttons to move around the matrix and press

Menu button to change the value from "

" to "

" or "

" to "

F. MPAA : Motion Picture Association (of) America [movie rating organization]

U General Guidance

U Parental Guidance Suggested

PG-13

U Parental Strongly Cautioned

U Restricted Under 17 Requires

NC-17 U No Children Under 17 Admitted

X U Adult Only

NR U Not Rated

5. Entering a new pin number

A. Use numeric keys enter a new pin number. Pin number confirm menu appears.

B. Again, use numeric keys to enter the pin number you entered at the previous

step. If the two pin numbers do not match, "INCORRECT PIN" message will be

displayed for 3 seconds.

6. Blocking Screen

A. If the incoming signal’s rating is higher than the one specified, the screen will be

blanked and "EXCESSIVE RATING" message will be appeared.

NOTE :

When the screen is blocked by V-Chip, and if you want to change V-Chip setting,

press Exit button on the remote control or on the front cabinet of the monitor to

bring up OSD Menu