User's Manual

CONFIGURING AND ADJUSTING THE DISPLAY
40
★
V- Chip Setting
The Telecommunications Act of 1996 in USA requires that every television made, starting
in 1998, must be equipped with the technological device named V - Chip. The V - Chip can
block certain rated television shows off television (if chosen) so children cannot watch
programs that their parents do not approve. With this device, program-rating information
will be transmitted along with the television signal, and be decoded by the chip in each
television. The chip will then compare the rating codes to values preset by the viewer,
which is meant to be the parents. If the rating codes are higher than the preset values, the
television signal will be blocked, and a blank screen will be displayed.
KDS CT1503/1702 have this feature and you can adjust the V - Chip setting via OSD.
Use arrow keys on the remote controller or control buttons on the front cabinet of the
monitor to change the setting.
1. Select V - Chip on OSD, then enter 4 digits of pin number.
A. Initial pin number is “0000”
B. If you enter an incorrect pin number “Incorrect” message will be displayed for 3
seconds.
2. Use arrow keys to change or to activate the highlighted function.
3. Setting up TV Guidelines
C. Use Up/Down/Left/Right arrow buttons to move around the matrix and press
Menu button to change the value from "U" to "B" or "B" to "U"
D. U : Unblock B : Block
AII FV V S L D
TV-Y B
TV-Y7 B B
TV-G U
TV-PG
U U U U U
TV-14
U U U U
TV-MA
U U U U
TV-Y : Young Children
TV-Y7 : Children 7 and over
TV-G : General Audience
TV-PG : Parent Guidance
TV-14 : Viewers 14 and over
TV-MA : Mature audience
FV : Fantasy Violence
V : Violence
S : Sexual Situation
L : Coarse Language
D : Suggestive Dialog