User's Manual

CONNECTING
17
Connecting Your Monitor to a Tuner (TV/CATV)
1. Carefully unpack all the components and verify all the parts are present and
undamaged. (See page 8.)
2. Organize the cables you need and familiarize yourself with the connection
configuration for the CT1702, see pages 11 & 16.
3. With the Monitor laying screen-side down on a smooth, clean surface, flip
open the Monitor base.
4. Connect the Antenna (from your Cable TV or external/internal antenna) into
the Monitor’s “ANTENNA” connector.
5. Connect the round AC/DC Adapter Plug to the Monitor’s “PWR” connector.
6. Connect the Power Cord to the AC/DC Adapter.
7. If you are not connecting any more components (e.g. DVD or VCR),
continue with the remaining steps.
If you are connecting other components to the Monitor, continue to the next
appropriately labeled “CONNECTING” section.
8. Stand up your Monitor and adjust it for proper viewing. (See page 14.)
9. Plug the power cords for both the monitor and computer in to the wall power
outlet or surge protector.
10. Turn ON the monitor.
REMINDER:
Do not plug the power cord into the wall outlet o
r
surge protector yet.
REMINDER:
The Antenna connection should be hand-tight.
TIP:
For easier access to the cable connections, keep th
e
monitor laying screen-side down on a smooth surface.