User's Manual

CONNECTING
15
12. Stand your Monitor up and adjust it to the most comfortable viewing angle
(see page 12).
13. Plug the power cords for both the monitor and computer in to the wall power
outlet or surge protector.
14. Turn both the monitor and computer on.
15. Remove the plastic protective cover from the front of the Monitor.
16. Pressing either the SELECT button on the front of the Monitor (page 12)
or the SOURCE button on the Remote Control (page 15), scroll to the
ANALOG Input Source option.
17. Insert the set-up CD into your computer’s CD or DVD drive and follow the
instructions (see page 17).
18. If necessary, fine-tune the display by using the on screen display (OSD)
menus (image position, brightness, etc). (see page 19-21).
19. Enjoy your new monitor from Korea Data Systems Co., Ltd.
TIP:
Save the original container and the packin
g
materials in case there are difficulties and yo
u
need to return the monitor.
REMINDER:
Do not plug the power cord into the wall outlet o
r
surge protector yet.
REMINDER:
Insert the battery into the Remote Control.