Installation Guide

ASSEMBLY
Tools needed for assembly are screwdriver and wrench (not supplied).
Keep the 2 arrows together
INSTALLATION
First select a location to install your composter that is convenient to move materials to
and from, usually close to a garden. Choose a flat surface with enough room to be able
to rotate the composter and, if possible, be sure to select a location in direct sunlight,
to help cook your compost.
The composting process works best by mixing moist greens (nitrogen rich) with dry
browns. (carbon rich) in a ratio of approximately 2 parts greens to 1 part browns.
Greens are: kitchen scraps, grass clippings, garden & house plants
Browns are: leaves, straw/hay, saw dust, twigs
WARNING!
DO NOT ADD meats / fats / bones, dairy products, trash / plastic, wood ashes,
invasive plants / weeds (i.e. poison ivy).
A. Composter has 2 chambers
ASSEMBLY COMPLETED!
B. Add new raw material to chamber 1,
fully rotating 5-10 times after each
deposit, or every 2-3 days.
WHAT TO PUT IN YOUR COMPOSTER
BATCH COMPOSTING
4 5
Assemble the door panel to the side panels. Assemble the first panel to the side panels.
Add the last panel. Notice the 2 holes here and press into below
Assemble Parts G & H together,
forming a U-shape.
button
hole
Part F Part F
Part G Part H
2 buttons
Assemble a second Parts G &H
together, get 2 U-shapes
Secure Part I on Part F with Part L (long screw)Insert Part I
Assemble 2 Parts F to the 2 U-shapes.
Assemble 2 Parts J on Part I
Part J
Part I
Part J
After assemble the 1 door panel (part B) and
4 panels, put the middle panel in it