Use and Care Manual

8
Switching on the appliance and setting the temperature
To switch the appliance on, press the + buttons and hold 5 seconds To turn the appliance
off again, press and hold the power button for 5 seconds.
o Press the "SET" to set the internal temperature of each zone. Temperatures in degrees will
a
ppear on every screen corresponding to distinct areas for the top compartment and the
lower compartment.
When you press the "SET” for the first time, the LED displays indicate the factory preset
temperature, or to the compartment above 10 ° C/50 ° F and the lower compartment 16 ° C/60 ° F.
o Press the "SET" button once. The left display will flash above the compartment. Press the
buttons "UP" or "DOWN" to choose the temperature you want.
o If you press again the button "SET" , the right display will flash the bottom of the
compartment. Press the "UP" or "DOWN" to choose the temperature you want.
o The temperature increase of 1 ° C or 1 ° F if you click once on "UP" or decrease by 1 ° C / 1 ° F if
you press once on the button "DOWN"
To see the set temperature of each zone at any time, touch the buttons "UP" or "DOWN",
set temperatures temporarily flash on the display for about 5 seconds. Use the "SET" to see
the selected temperature zone or the other.
IMPORTANT: When the temperature is changed, the compressor works harder to reach
the required temperature. During this time, the side panels of the wine cooler can reach
up to 45°C however they will cool down when the set temperature is reached.
Changing between Fahrenheit and Celsius
o You can select whether the temperature displays show Celsius or Fahrenheit.
To alter what the temperature displays are showing, press the press the button for 5 seconds.
Safety lock
The wine cooler has an automatic safety lock to prevent unintentional operation of the wine cooler
by other persons such as children.
o If no buttons have been pressed for 2 minutes, the control panel will lock automatically. All
buttons on right side of control panel will be deactivated. But the buttons on left side of
control panel is still active.
+ and hold for 5 seconds, all buttons on theo To release the safety lock, press the
control panel will be activated.