Use and Care Manual

11
Reversing the door Swing
This unit has the capability of either opening the door from the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reserve the
opening direction, please follow these instructions:
Note: Before reversing the door, the power must be shut off. All parts removed must be saved to
to the reinstallation of the door. This unit has been built with the door hinges on the right. If you
wish to change the opening direction, follow the instructions below:
1. As shown in figure ①, remove the screws of the lower door hinge and the fixing plate of the
door hinge shaft
2. As shown in figure ②, remove the door
3. As shown in figure ③, replace door hinge.
4. As shown in figure ④, install the upper door, and then install the door hinge shaft fixing plate
and lower door hinge.
① ②