Use and Care Manual

User Manual
WARNINGS
• Do not touch any hot surfaces.
• Do not plug or unplug unit with wet hands.
• Do not immerse unit, cord or plug in liquid at any time.
• Unplug cord from outlet when not in use and before cleaning.
• Do not operate unattended.
• Do not use this unit for anything other than intended use.
• Do not use outdoors.
• Operate the unit with legs provided to prevent overheating of surfaces below.
• Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has been
damaged in any manner.
• Keep children and animals away from unit.
• Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to
property loss and injury. All repairs should be done by authorized professionals only.
• Ensure that the designated power supply is adequate for continual usage and the voltage is correct.
ASSEMBLY
NOTE – Legs and under‐shelf must be assembled before
securing legs to the table.
Standard Adjustable under‐shelf
1 Remove the unit from the shipping carton and packaging.
2 Inspect the contents to ensure there is no damage to the unit.
3 Rest table on its top with gussets facing up. (use cardboard or other material to prevent scratching
top)
4 Install legs into gussets. Make sure the rivet in leg is closer to gusset than to foot end.
5 Align under‐shelf gussets with legs and slide under‐shelf down legs to desired position. (DO NOT
force or beat corners as damage could occur)
6 Tighten set screws in under‐shelf gussets to secure under‐shelf and install feet into legs using a
rubber mallet.
7 Tighten set screws in gussets to secure legs to table.
8 Place table on back with control knobs up.
9 See next page.
1
For any service-related Issues, please contact us:
Phone Number: 718-576-6342
Email address: [e-mail]