Use and Care Manual

3
Technical Specifications
Model Voltage Power Current Temperature
Range
Capacity Dimensions
HxWxD(mm)
Weight
(kg)
VRX1200/330
220～240V/50Hz
115W 1.1A
2～10℃
5xGN1/4 Container 430x1200x335 25
VRX1400/330
220～240V/50Hz
115W 1.1A
2～10℃
6xGN1/4 Container 430x1400x335 27
VRX1500/330
220～240V/50Hz
115W 1.1A
2～10℃
7xGN1/4 Container 430x1500x335 29
VRX1600/330
220～240V/50Hz
115W 1.1A
2～10℃
7xGN1/4 Container 430x1600x335 30
VRX1800/330
220～240V/50Hz
115W 1.1A
2～10℃
8xGN1/4 Container 430x1800x335 32
VRX2000/330
220～240V/50Hz
115W 1.1A
2～10℃
10xGN1/4 Container 430x2000x335 34
VRX1200/380
220～240V/50Hz
115W 1.1A
2～10℃
4xGN1/3 Container 430x1200x395 28
VRX1400/380
220～240V/50Hz
115W 1.1A
2～10℃
6xGN1/3 Container 430x1400x395 30
VRX1500/380
220～240V/50Hz
115W 1.1A
2～10℃
6xGN1/3 Container 430x1500x395 31
VRX1600/380
220～240V/50Hz
115W 1.1A
2～10℃
7xGN1/3 Container 430x1600x395 32
VRX1800/380
220～240V/50Hz
115W 1.1A
2～10℃
8xGN1/3 Container 430x1800x395 34
VRX2000/380
220～240V/50Hz
115W 1.1A
2～10℃
9xGN1/3 Container 430x2000x395 36
Electrical Wiring
Appliances are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard. The plug is to be
connected to a suitable mains socket. Appliances are wired as follows:
•Live wire (coloured brown) to terminal marked L
•Neutral wire (coloured blue) to terminal marked N
•Earth wire (coloured green) to terminal marked E
All appliances must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being
required they must be readily accessible.
Disposal
EU regulations require refrigeration product to be disposed of by specialist companies who remove or recycle all gasses,
metal and plastic components.
Consult your local waste collection authority regarding disposal of your appliance. Local authorities are not obliged to
dispose of commercial refrigeration equipment but may be able to offer advice on how to dispose of the equipment locally.
Compliance
Parts have undergone strict product testing in order to comply with regulatory standards and specification set by
international, independent, and federal authorities.
Products have been approved to carry the following symbol: