User Manual Refrigerated Salad Display SCDC-7T SCDC-8T 1 WWW.KOOLMORE.
Contents 1. Structure and Parts………………………………………………………….3 2. Location and Set Up………………………………………………………...4 3. Safety and Power Supply…………………………………………………….5 4. Operation…………………………………………………………………....6-7 5. Digital Controller……………………………………………………………….6-7 6. Maintenance………………………………………………………………….7 7. Troubleshooting……………………………………………………………....8 8. Technical Specifications………………………………………………………….9 9. Warranty…………………………………………………………………………10-11 2 WWW.KOOLMORE.
1 Condensation area Storage area consists of trays inside the internal compartment where foodstuffs can be stored Cooling area this is situated inside the foamed insulation and this is situated in the right side and is characterized by the presence of the consists of a copper tube Digital Controller motor-condensing unit applied to the internal compartment.
Refrigerator Location and Set Up Handle With Care Unplug the wall socket, never tilt over 45 degrees while handling Wait! Wait at least two hours after handling the unit before plugging in to the wall socket Dry Surface Always place the refrigerator on completely dry surface Level Surface Place the refrigerator on a solid and level surface, the unit may be noisy or even malfunction if placed on an uneven surface.
Safety and Power Supply The unit should have its own 110/60Hz dedicated outlet, do not share the outlet. Do not use extension cords. Ensure the unit is not resting on or against the electrical cord. Make sure there is no damage to the cable After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could cause damage to the compressor, please make sure there is no damage to the cable.
Operation 1. Plug the refrigerator in to a 115V exclusive socket. After the refrigerator is running, place your hand on the air suction to confirm that it is sufficiently cool 2. 3. Set the digital controller to the desired temperature (see below) Adjust the shelves to the desired location - Remove the shelves. - Move the shelve support to a suitable height. - Place the shelves on the support. - To get an even temperature between the top and bottom, please space the shelves equally.
4. Refrigerant LED: When the compressor is running, the LED is on; when the refrigerator temperature is constant, the LED is off; During the delay start, the LED flashes. 5. Defrost LED: during the defrost cycle, the LED is on; when it stops defrosting, the LED is off. During the delayed display of defrost, the LED flashes. Maintenance Periodical cleaning and maintenance is necessary. Always unplug the socket before maintenance.
Troubleshooting Issue Cause and Remedy Is the plug in the socket? No refrigeration Is the fuse working? Is there power? Is the unit under direct sunlight? Is there a heat source nearby? Is the surrounding ventilation adequate? Does the door close well? Is door open for long periods of time? Is the door seal strip deformed or damaged? Does food block the air suction or outlet? Is the refrigerator to full? Unsatisfactory refrigeration The refrigerator is not leveled The refrigerator is touching the wall
Technical Specifications Model Coolant and injection quantity(g) General Rated input power(W) Rated current(A) Kind of weather Refrigeration temperature( 'C) Electric shock protection class SCDC-7T SCDC-8T 157 2.2 170 2.4 I Total effective volume 7x1/4 GN 8x1/4 GN Net weight(Lbs.) Rated voltage(V) Rated Frequency (Hz) 95.9 106.9 120-120 60 Overall dimension (mm) (LxWxH) 59 X 13.1 X 8.8 9 70.8 X 13.1 X 8.8 WWW.KOOLMORE.
Warranty The one year1 Year warranty -is Valid only in the United States Unless otherwise stated, KOOLMORE Supply Inc. warrants to the original purchaser of new, qualified Koolmore units (and all parts thereof), that such equipment will be free from defects in material and workmanship for a period of 1 year from the date of delivery. If a qualified product is found to be defective during this period, KOOLMORE Supply Inc.
WARRANTY CLAIMS. All claims should include: model number of the cooler, the serial number of the cabinet, proof of purchase, date of installation, and all pertinent information supporting the existence of the alleged defect. Any action or breach of these warranty provisions must be commenced within one (1) year after that cause of action has accrued. For Warranty Inquiries or Service: To obtain warranty service contact warranty@koolmore.com Failure to contact KOOLMORE Supply Inc.
