Use and Care Manual

GLASS DOOR MERCHANDISERS
▲ Check to see if contents are blocking the air duct.
▲ Check the temperature controller for possible incorrect temperature setting.
▲ Check to see if refrigerant charge is low.
▲ Make sure the door is completely closed.
NOT INTERIOR LIGHT
▲ Turn off the light switch and turn it on again.
▲ Make sure the bulb is correctly inserted into the sockets.
▲ Check the bulb, and replace it if blown.
UNIT NOISY
▲ Make sure to install the unit on level surface.
▲Make sure to maintain the minimum clearance of 6” from the
wall.
▲ Check for the loose parts or mounting.
▲Make sure the tubing is free from any contact to avoid tubing
rattle.
CONDENSATION ON
▲ Reduce the relatively humidity in the area where the unit is
CABINET AND/OR FLOOR
installed.
▲ Gasket on door or head section is not sealing properly. Repair
or replace gasket as necessary.
4