Use and Care Manual

GLASS DOOR MERCHANDISERS
INSTALLATION
■ The refrigeration system operates most efficiently when installed in an area
with cool, dry air circulation.
■ There must be at least 6 inches of clearance on both sides and the back of
the cabinet.
■ Select a location away form the heat and moisture generating
equipment such as stoves, ovens, etc.
■ Avoid direct sun rays.
■ Be sure that the floor where you intend to install the unit is strong and level
enough to support the total weight of the unit and its contents.
■ To minimize shock and fire hazards, be sure that the unit is properly
grounded. For your safety and protection, all units are equipped with a
special three-prong grounding plug on the service cord.
■ All units are designed for indoor use. Outdoor use may cause
significant damage to the unit.
PRECAUTIONS
■ To minimize shock and fire hazards, be sure not to overload the outlet.
■ To minimize electric shock and malfunction, do not spray the unit
with water.
■ To minimize fire hazards, do not use flammable spray products near the
unit.
■ After unplugging the unit, wait at least 6 minutes before re-plugging it. It
may cause compressor failure if plugged in before 6 minutes waiting
period.
■ Cautions for cleaning:
﹡Unplug the power cord before cleaning.
﹡Do not unplug/plug the power cord with wet hands.
﹡Do not use an abrasive cleaners, solvents or polishing agents on plastic
parts. Doing so might cause cracking or discoloring.
■ When it is not in use：
﹡Unplug the power cord.
2