Use and Care Manual

3
Temperature Control
The temperature can be controlled with the temperature control knob.
To adjust the temperature turn the knob clockwise. The higher the number
the lower the temperature. Generally, position ‘3-4’ is optimal. The
“0”position will stop the compressor while the “6” position will allow the
compressor to continually run do not keep the knob at this point for more
than 4-5 hours
Maintenance
 The Refrigerator should be cleaned regularly. When cleaning, turn off the power,
remove the product and clean the inside using water or a little neutral detergent.
 Do not use boiling water, acid, chemical diluents, petrol and oil, or dirt- removing
powder.
 Dry it after cleaning.
 Use light soap water when cleaning the door seal, apply a little of talcum powder
on it after natural drying to extend its service life.
 Use soft cloth with water or a little detergent to clean the out surface. Note,
keep the power supply away from water