Use and Care Manual

2
Warning!!
DANGER: Risk of fire or explosion. Flammable refrigerant R290 used. To be
repaired only by trained service personnel. Do not use mechanical devices
to defrost refrigerator. Do not puncture refrigerant tubing.
Transportation and Set Up
1. Do not transport the unit on an incline of more than 45 degrees.
2. Remove all packaging before using the Refrigerator
3. Install the Refrigerator in a well ventilated area, with a 4” clearance around
the cabinet walls for proper air circulation.
4. Ensure the Refrigerator is placed on a stable surface to avoid vibration and
noise.
5. Install the Refrigerator in a dry area, do not use under direct sunlight, keep
away from any corrosive materials.
6.
7. Before using the refrigerator, allow the unit to run for approximately one
hour.
Safety
1. Never store flammable, explosive or corrosive products in the refrigerator,
and keep the refrigerator away from such materials.
2. If power is cut off, wait at least 5 minutes before turning on again to avoid
damage to the compressor.
3. The temperature control may need to be adjusted based on the amount
of food in the refrigerator and the ambient room temperature. More food
or a higher room temperature may require a lower temperature setting
(higher number).
4. The cabinet is intended exclusively for the storage and/or display of
packaged food. For proper safety non-packaged foods should be packed
in plastic bags or containers.
5. Do no overload the refrigerator, leave room between products to allow for
proper air circulation.
6. Please make sure that your unit has its own dedicated outlet.
7. Do not use an extension cord.