User Manual Refrigerated Countertop Merchandiser Display CDC-4C-BK CDC-5C-BK Please read the manual thoroughly prior to equipment Set-up, operation and maintenance! WWW.KOOLMORE.
Contents 1. Structure and Parts…………………………………………………………………………….3 2. Location and Set Up…………………………………………………………….....................4 3. Safety and Power Supply……………………………………………………..........................5 4. Operation…………………………………………………………………...............................6-7 5. Digital Controller…………………………………………………………………........................6-7 6. Maintenance………………………………………………………………….........................7 7. Troubleshooting…………………………………………………………………………........8 8.
Structure and Parts Shelf Glass Door The height of the shelf is adjustable for various goods. For adjustment: 1. Take out the shelf 2. Move the shelf support to suitable height. 3. Put the shelf on the supports Air Suction Never block the suction. Air is sucked in and cold air is circulated inside the refrigerator. Air Outlet Never block the air outlet. Let inside circulating cold air flow out.
Refrigerator Location and Set Up Handle With Care Unplug the wall socket, never tilt over 45 degrees while handling Wait! Wait at least two hours after handling the unit before plugging in to the wall socket Dry Surface Always place the refrigerator on completely dry surface Level Surface Place the refrigerator on a solid and level surface, the unit may be noisy or even malfunction if placed on an uneven surface.
- Safety and Power Supply The unit should have its own 110/60Hz dedicated outlet, do not share the outlet. Do not use extension cords. Ensure the unit is not resting on or against the electrical cord. Make sure there is no damage to the cable After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could cause damage to the compressor, please make sure there is no damage to the cable.
Operation 1. 2. 3. Plug the refrigerator in to a 115V exclusive socket. After the refrigerator is running, place your hand on the air suction to confirm that it is sufficiently cool Set the digital controller to the desired temperature (see below) Adjust the shelves to the desired location - Remove the shelves. - Move the shelve support to a suitable height. - Place the shelves on the support. - To get an even temperature between the top and bottom, please space the shelves equally.
2. If no more buttons are pressed within 10 seconds, the unit’s current temperature will be displayed. 3. Lights: Press button to turn lights ‘on’ or ‘off’. Manual start/stop defrost: Press button and hold for 6 seconds to defrost or stop defrost. 4. Refrigerant LED: When the compressor is running, the LED is on; when the refrigerator temperature is constant, the LED is off; During the delay start, the LED flashes. 5.
Troubleshooting Issue No refrigeration Cause and Remedy Is the plug in the socket? Is the fuse working? Is there power? Is the unit under direct sunlight? Is there a heat source nearby? Unsatisfactory refrigeration Is the surrounding ventilation adequate? Does the door close well? Is door open for long periods of time? Is the door seal strip deformed or damaged? Does food block the air suction or outlet? Is the refrigerator to full? The refrigerator is not leveled The refrigerator is too noisy The refri
Technical Specifications Model Coolant and injection quantity(g) General Rated input power(W) Type of climate Refrigeration temperature F Electric shock protection class Rated Current(A) : Lamp power(W) : Total effective volume (CU.FT.) Net weight Lbs. Rated voltage(V) Rated Frequency(Hz) CDC-4C-BK R134a(200) 230/180 4 32-53.6 I 3/2.4 2 (LED) 4.5 121.2 110-220 60 27.4 x 22.7 x Overall dimension (In) (L x W x H) 26.6 WWW.KOOLMORE.COM -9- CDC-5C-BK R134a(140) 230/180 4 32-53.6 I 2.6 2.5 (LED) 5.6 145.
Warranty The one year1 Year warranty -is Valid only in the United States Unless otherwise stated, KOOLMORE Supply Inc. warrants to the original purchaser of new, qualified Koolmore units (and all parts thereof), that such equipment will be free from defects in material and workmanship for a period of 1 year from the date of delivery. If a qualified product is found to be defective during this period, KOOLMORE Supply Inc.
WARRANTY CLAIMS. All claims should include: model number of the cooler, the serial number of the cabinet, proof of purchase, date of installation, and all pertinent information supporting the existence of the alleged defect. Any action or breach of these warranty provisions must be commenced within one (1) year after that cause of action has accrued. For Warranty Inquiries or Service: To obtain warranty service contact warranty@koolmore.com Failure to contact KOOLMORE Supply Inc.
