Use and Care Guide

2. If no more buttons are pressed within 10 seconds, the unit’s current temperature will be displayed.
3. Lights: Press button to turn lights ‘on’ or ‘off’.
Manual start/stop defrost: Press button and hold for 6 seconds to defrost or stop defrost.
4. Refrigerant LED: When the compressor is running, the LED is on; when the
refrigerator temperature is constant, the LED is off; During the delay start, the LED
flashes.
5. Defrost LED: during the defrost cycle, the LED is on; when it stops defrosting, the LED is
off. During the delayed display of defrost, the LED flashes.
Maintenance
Periodical cleaning and maintenance is necessary. Always unplug the socket before maintenance. Never
use A damaged plug or loose socket to prevent, electric shock or short circuit. Never flush the refrigerator.
Never use alkali detergent, soap, gasoline, acetone or brush.
To clean the interior
• When cleaning the cabinet interior, use a solvent of warm water and mild soap.
• Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior finish.
• Periodically remove the shelves and shelf brackets from the unit, and clean them with a mild soap and
warm water
Cleaning the Fan Blades and Motor
• If necessary, clean the fan blades and motor with a soft cloth.
• If it is necessary to wash the fan blades, cover the fan motor to prevent moisture damage.
Cleaning the Condenser Coil
• For efficient operation, keep the condenser surface free of dust, dirt, and lint.
• We recommend cleaning the condenser coil at least once per month.
• Clean the condenser with a commercial condenser coil cleaner.
WWW.KOOLMORE.COM
-7-