Use and Care Manual

CLEANING BEFORE USE

Before using the appliance for the first time, wash the interior and all internal accesso-

ries with lukewarm water and some neutral soap to remove the typical smell of a

brand-new product, then dry thoroughly.

Important! It is necessary to have good ventilation around the freezer to allow for the

dissipation of heat, high efficiency, and low power consumption. For this reason,

sufficiently cleared space should be available around the freezer. It is advisable for there

to be 3 inches separating the back of the freezer to the wall and at least 4 inches of

space on its two sides, a height of over 4 inches from its top.

• Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in

the lower rear section of the appliance, as poor air circulation can affect performance.

• Built-in appliances should be positioned away from heat sources such as heaters

and direct sunlight.

LEVELING

• The appliance should be level to eliminate vibration. To make the appliance level, it

should be upright, and both adjusters should be in stable contact with the floor. You

can also adjust the level by unscrewing the appropriate level adjustment in the front

(use your fingers or a suitable wrench).

• Allow the unit to operate for about 1 hour to cool the compartment before placing

items into the appliance.

IV. DEFROSTING, FIRST USE AND INSTALLATION

4 Inch

3 Inch