Use and Care Manual

▪ with a minimum 6” overhang surrounding the fryer. A make-up air style is suggested, with a
built-in and tested fire protection system (e.g., Ansul™).
▪ The appliance’s electrical schematic diagram is located inside the door.
▪ Do not directly connect the fryer flue or exhaust to the ventilation hood.
▪ Ensure the hood grease filters are at least 18” above the fryer exhaust flue.
FLUE INSTALLATION:

BEFORE USING FRYER INSTALL AND ASSEMBLE THE 10-5/8” FLUE AND
DEFLECTOR PLATE TO THE FRYER.
1. Unpack the flue box and flue wrap
2. Place the inner flue box over the flue and secure it with four self-tapping screws using a
5/16” socket
3. Slide the flue wrap over the inner flue [ Ensure the fryer is properly positioned under the
hood with proper overhang on all sides of the appliance – code requires ≥ a 6” hood overhang
distance]
4. Secure it with two self-tapping screws on the back and then secure it with two slotted head
M5 screws from front.