Warranty

2. If no more buttons are pressed within 10 seconds, the unit’s current temperature will be displayed.
3. Lights: Press button to turn lights ‘on’ or ‘off’.
Manual start/stop defrost: Press button and hold for 6 seconds to defrost or stop defrost.
4. Refrigerant LED: When the compressor is running, the LED is on; when the
refrigerator temperature is constant, the LED is off; During the delay start, the LED
flashes.
5. Defrost LED: during the defrost cycle, the LED is on; when it stops defrosting, the LED is
off. During the delayed display of defrost, the LED flashes.
Maintenance
1. Cabinet cleaning. The product should be cleaned once a week with the power supply
disconnected. When cleaning please use mild rinsing with mild soap and water
1. Remove 4 screws from the top of the front grill.
2
. Pull out the front grill.
3
. Take out the filter.
2. Cleaning the filter
• If Message "EE4" appears on the display, please clean the filter immediately. After cleaning, if
message "EE4" appears again, please contact your after service
.
Instructions for cleaning the filter
3. Frequently observe the operation of the product. in case of any abnormal noise, smell or smog, cut off the
power supply immediately and call for professionals for help. Do not restart the product before the issue is
cleared.