User Manual Open Air Merchandiser Refrigerator CDAU-13C WWW.KOOLMORE.
Please read the manual thoroughly prior to equipment Set-up, operation and maintenance! Contents 1. Structure and Parts…………………………………………………………………………....3 2. Location and Set Up…………………………………………………………….....................4 3. Safety and Power Supply……………………………………………………..........................5 4. Operation…………………………………………………………………..............................6-7 5. Digital Controller…………………………………………………………………........................6-7 6. Maintenance………………………………………………………………….........................7 7.
Structure and Parts Air Outlet LED Lights Curtain Air Suction Castors
Refrigerator Location and Set Up Handle With Care Unplug the wall socket, never tilt over 45 degrees while handling Wait! Wait at least two hours after handling the unit before plugging in to the wall socket Dry Surface Always place the refrigerator on completely dry surface Level Surface Place the refrigerator on a solid and level surface, the unit may be noisy or even malfunction if placed on an uneven surface.
- Safety and Power Supply The unit should have its own 110/60Hz dedicated outlet, do not share the outlet. Do not use extension cords. Ensure the unit is not resting on or against the electrical cord. Make sure there is no damage to the cable After unplugging the unit, wait at least 10 minutes before plugging it back in. Failure to do so could cause damage to the compressor, please make sure there is no damage to the cable.
Operation 1. 2. 3. Plug the refrigerator in to a 115V exclusive socket. After the refrigerator is running, place your hand on the air suction to confirm that it is sufficiently cool Set the digital controller to the desired temperature (see below) Adjust the shelves to the desired location - Remove the shelves. - Move the shelve support to a suitable height. - Place the shelves on the support. - To get an even temperature between the top and bottom, please space the shelves equally.
2. If no more buttons are pressed within 10 seconds, the unit’s current temperature will be displayed. 3. Lights: Press button to turn lights ‘on’ or ‘off’. Manual start/stop defrost: Press button and hold for 6 seconds to defrost or stop defrost. 4. Refrigerant LED: When the compressor is running, the LED is on; when the refrigerator temperature is constant, the LED is off; During the delay start, the LED flashes. 5.
Troubleshooting Issues Cause Solution Strange noise under the bottom shelf Fan blade broken. Power off and fix the blade. Non-cooling in spite of normal operation 1 Power is off 3.Refrigerant leak 4.Unit failure. 1. Power it on. 3.Patch the leak and refill refrigerant 4.Call for professionals. 1. Evaporator blocked by ice 3. Temperature is to low. 4. Vent is blocked by product 1. Increase defrost frequency. 2.Replace the fan. 3. Adjust the set temperature 4.
Technical Specifications Coolant and injection quantity(g) General Rated input power(W) Power running of electrical heating element(W) Max.ambienttemp./RH Refrigeration temperature Rated voltage(V) Rated Frequency(Hz) Rated Current(A) Type of Climate Foaming agent Net weight(Lbs.) Lamp power(W) Total effective volume(L) Overall dimension (mm) (LxWxH) R290&(146) 1200 450 80.6 °F /7 0% (35.6-50) 110-12060 12.2 6 CsH10 271 2 5*2(LED) 11.3 36.*33.3*59.4 WWW.KOOLMORE.
Warranty The one year1 Year warranty -is Valid only in the United States Unless otherwise stated, KOOLMORE Supply Inc. warrants to the original purchaser of new, qualified Koolmore units (and all parts thereof), that such equipment will be free from defects in material and workmanship for a period of 1 year from the date of delivery. If a qualified product is found to be defective during this period, KOOLMORE Supply Inc.
WARRANTY CLAIMS. All claims should include: model number of the cooler, the serial number of the cabinet, proof of purchase, date of installation, and all pertinent information supporting the existence of the alleged defect. Any action or breach of these warranty provisions must be commenced within one (1) year after that cause of action has accrued. For Warranty Inquiries or Service: To obtain warranty service contact warranty@koolmore.com Failure to contact KOOLMORE Supply Inc.
-11-
