Instructions / Assembly

TROUBLESHOOTING INSTRUCTIONS
29
CHECK THESE SOLUTIONS IF YOUR DRYER
If your dryer has any problems as followings, you can check as the solutions listed
below before making a service call. This will help you save time and money.
Problem
Solution
The unit doesn't start
- Make sure the door is latched shut.
- Be sure the power cord is plugged into a live electrical outlet.
- Check the home's circuit breaker and fuses.
- Press the Start/Pause button again if the door is opened
during the cycle.
The unit doesn't heat
- Check the home's circuit breaker and fuses.
- Select a heat setting other than Air fluff .
- Clean the lint filter .
- Dryer may have moved into the cool-down process of the
cycle.
Doesn't dry
- Check the entire above, plus...
- Do not overload. 1 wash load = 1 dry load.
- Sort heavy items from lightweight items.
- Large, bulky items like blankets or comforters may require
repositioning to ensure even drying.
- Load may be too small to tumble properly. Add a few towels.
The unit is noisy
- Check the load for objects such as coins, loose buttons, nails,
broken zips, etc. Remove promptly.
- It is normal to hear the dryer gas valve or heating element
cycle on and off during the drying cycle.
- Be sure the dryer is leveled properly as outlined in the
installation instruction.
-The sensor cycle will estimate dampness of clothes automatically.
Due to amount and material of clothes, to assure the expected
d
ampness，the dryer will adjust remaining time, this is normal .
The remaining time
changes abnormally