Manualshelf

Use and Care Manual

ManualsBrandsKoolmore ManualsAppliances41 in. Refrigerated Vending Machine, 60 Slots With CC reader and Bill Acceptor in Black, 75 cu. ft.
12345678910
WARNING
VENDING MACHINE USE PREPARATION AND PLACEMENT ENVIRONMENT
1. Upon receiving the machine, carefully inspect the packaging for any signs of damage. If any damage is found,
please contact the logistics provider and our company directly for assistance.
2. Before using the machine, remove all packaging components such as wood boards, protective films, foam, and cable tie.
3. Choose an appropriate location for placing the machine, considering the following factors:
◦ The placement area should be dry, well-ventilated, and away from sources of heat.
◦ Ensure the machine is protected from rain or water splashes.
◦ Avoid placing the machine in areas with low temperatures that may affect its operation.
◦ Select a solid and stable ground surface for proper support.
◦ Leave a clearance of at least 7.8 inch from the wall for ventilation.
4. After placing the machine, allow it to stand for a minimum of 30 minutes before powering it on. This ensures the
machine's stability and proper operation. If cooling functionality is required, allow the machine to stand for 4-5
hours before turning on the cooling feature to prevent any adverse effects on the compressor. The machine has
a normal power consumption of 60W, a maximum cooling power of 510W, and a maximum heating power of
760W. Cooling and heating functions are optional features.
Note: Adhering to the above guidelines for preparation and placement environment will help ensure the optimal
performance and longevity of the vending machine.
7.8”
7.8”
7.8”
7.8”
7.8”
Keep Distance; 7.8 Inch or above.
Ensure a clearance of at least 7.87
inches from the rear, left, and right
sides of the machine.
Avoid allowing water to come into
contact with the machine.
4
Avoid placing the machine
in direct sunlight or near a
heat source.
Do not place the machine in an
area where it may be exposed to
extremely cold temperatures.
The power supply of the vending machine must be grounded!
An ungrounded machine must not be used, as it poses serious
security risks. Ensure proper grounding before use!