Use and Care Manual

LAYOUT AND STORAGE (cont.)LAYOUT AND STORAGE (cont.)
SLIDING SHELF
To move a sliding shelf:
1. Remove all bottles
2. Pull out the shelf
3. Refit them as show below instruction
4. Move out the shelf
RECOMMENDATIONS FOR LAYOUT AND STORAGE OF YOUR WINE CABINET
Your cabinet was designed to store a maximum number of bottles in total security. We recommend
that you observe the tips below to optimize loading.
- Spread your bottles out as evenly as possible over the shelves, so that weight is not
concentrated in one point, Also make sure your bottles do not touch the back of the cabinet, or
the step at bottom.
- Also make sure that bottles are not all grouped together at the top or bottom of the cabinet.
- Observe the loading instructions provided in section 6, according to the type of storage fixtures
with which your cabinet is equipped, and never stack bottles on a sliding shelf.
- Never try to pull out more than one sliding shelf at a time.
PLEASE NOTE
Before modifying your cabinet’s original configuration in any way, be sure to ask your dealer for
advice.
8
9
top view
side view
top view
side view