User Manual

Plastic Washer (with Long Screw)

Bottom Metal Nut (with Long Screw)

3 4

Ideally, the short screws with the Koolance AMD 64

Adapter kit are all that will be required to mount the

bracket. (These are standard ATX chassis screws.)

However, if the socket’s backplate is a different

design, the longer screws, plastic spacers, and nuts

may be needed to hold the bracket.

The included bracket clips are used to

mount the Cooler. Assemble the bracket by

inserting these clips into the center slider

of the CPU-300 Cooler.

Be sure to install the temperature sensor

before mounting the CPU Cooler.

The CPU-300 Cooler will use the black

tension screw, and the center hole for AMD

64 processors. (Please see the CPU-300

installation sheet for more details.)

Apply thermal paste to the CPU directly. Spread

the paste so that it evenly covers the CPU. A piece

of thick paper (such as a business card) works well

for this.

Despite the ﬁ nal method of attachment, the

Koolance AMD 64 Adapter should utilize

the original motherboard backplate. This is

a necessary component to avoid physical

damage of the motherboard or CPU.

Short Metal Screws

CAUTION: Always use the motherboard’s original CPU socket back-

plate with the Koolance AMD 64 Adapter. This component is designed

to avoid damage to your hardware from over-extension.