User Manual

6
1. INDOOR USE ONLY
* This unit is intended for indoor use only.
2. FOR LOCATION
Be sure that the location has enough floor space to support the total weight of the unit and its
contents.
Keep the unit away from sunlight and other heat generating equipment.
The minimum clearance between the back of the unit should be at least 7 inches from wall.
3. INSTALLING CASTORS
The Castors with brakes should be installed in front.
4. LEVELING
The unit should be level to provide adequate drainage.
5. ELECTRICAL CONNECTION
The unit should be plugged into a 115V/60Hz grounded wall receptacle to prevent electrical shock
and fire hazards.
Do not plug other electrical units into the same wall receptacle where this unit is plugged in.
Do not use an extension cord.
Compressor warranties are void if the compressor burns out due to low voltage.
6. INSTALLING SHELF
Install Shelves using the Shelf-Clips provided.
INSTALLATION