User Manual

7
1. To maintain proper refrigeration performance, the Condenser Fans should be checked monthly and
cleaned with a soft brush or vacuum cleaner as needed.
2. Wait at least 6 minutes after unplugging the unit before re-starting.
3. The interior and exterior of the unit can be cleaned using warm water.
Do not use an abrasive cleaner in order to prevent scratches on the surfaces.
4. The Door-Gasket should be cleaned frequently to maintain proper sealing.
1. The Temperature Controller (Thermostat) is located on the upper left of the back side of the cabinet
interior.
2. The Controller has been preset to"NORMAL" at the factory.
3. Set the Control-Knob toward "COOL" for higher temperature and "COLD" for lower temperature.
4. The Thermostat controls the Compressor's ON/OFF by sensing inside temperatures.
5. The relating unit is one of models that equipped with an off-cycle Defrost. And Series of KST, KUCR
belongs to this product range. However, Heating defrost was applied to the product range of KUCF-1,
2,60,3
MAINTENANCE & CLEANING
OPERATION