User Manual

8
Warning
■ Provide at least 8" of space between the product and
the wall.
- Being too close to the wall may cause product failure.
■ For cleaning and maintenance, remove the power plug from
the outlet and close the water supply valve. Perform work
only after the ice making operation stops.
- It may cause an electric shock or injury
■ Be sure to clean the condenser at least once a month.
- When dust accumulates, ventilation is restricted which may cause low
product performance, excess power consumption, product failure.
■ The ambient temperature must be between 50
o
F ~ 100
o
F.
- If installing in a cold place 50℉ or below, freeze break may occur.
- If installing in a hot place 100℉ or over, product failure may occur.
■ The pressure and temperature of the supply water must be
20~80 psi, and 50℉~90℉, respectively.
- If the pressure or temperature of the supply water exceeds the above specified
ranges, the ice quality may deteriorate and/or product failure
may occur.
■ Make sure to connect the product to the cold water outlet.
- Connection to a hot water line may cause product failure.
■ The supply water must be tap water.
- The use of a water filter is highly recommended