User Manual

21
Checkpoints
Maintenance
1. The Ice Maker is designed to include an ice storage bin.
2. When the volume of the ice reaches the preset limit,
ice formation is automatically stopped by a detector
sensor.
3. When the ice cubes are removed from the machine,
the ice detector sensor automatically restarts a new ice
making cycle to produce new ice cubes.
4. The Ice Maker operates as a fixed system.
1. General Maintenance and Check Procedure
· Please observe the installation and operation instructions provided in this User’s Manual.
· To maintain the proper condition of the Ice Maker and long-term operation without
failure, perform the maintenance procedures provided below;
2. Inspection of the Ice Maker
- Make sure to shut off the main power supply before servicing the machine.
- Check all hoses and joints to prevent leakage.
- Protect the cooling plate from rubbing against another plate and/or vibrating.
- Do not obstruct air way. Allow sufficient ventilation to the Ice Maker.
- Clean the filter installed on the front side of the product at least once a
month.
Sensor System
Ice Volume Detector Sensor