User Manual
7
■ When installing the product, be sure to connect
to the cold water supply.
- If connected to the hot water supply, it may cause loss of ice
production and product failure.
Warning
■ For cleaning and maintenance, remove the power plug from
the outlet and close the water supply valve. Perform work
only after the ice making operation stops.
- Failure to do so may cause an electric shock or injury.
■ Be sure to clean the air filter at least once a month.
- When dust accumulates on the air filter, ventilation is restricted which
may cause low ice production, excess power consumptionand
product failure.
■ Install the product in an area where the temperature
is between 50 ~ 100℉.
- In temperatures below 50
o
F, it may cause the unit to freeze and
prevent ice production.
- In temperatures above 100F, it may cause reduced ice productionand
product failure.
■ Product operating outside of these parameters may cause
loss of ice production and product failure.
- It may cause an electric shock or injury.