User Manual

29
What to check
1. Bin full sensor
- This ice maker is designed as a complete
ice making and storage system.
- The automatic sensor detects when the amount
of ice reaches the top of the ice bin and stops
making ice.
-
-
The sensor also detects when the ice has been
removed from the bin and resumes the ice
making process.
The ice maker operates automatically as a fixed
system.
3. Ice level detecting sensor
- Height of the sensor is factory preset set to
maintain a specific quantity of ice cubes.
- If you need thicker ice cubes,
raise the
bracket, and lower the bracket if you need
thinner cubes.
(Refer to page 24 for details)
- Make sure to clean around the sensor
on regular basis.
Thickness of ice cubes will vary if the sensor
gets contaminated.

High water level sensor
Low water level sensor
Water trough