User Manual

27
Ice thickness control
Ice Making and Harvesting Operations
Maintenance
◆ When ice cubes are made at the ice making
evaporator, low water level sensor works
and ice delivery starts.
◆ Ice cubes will automatically fall and are
collected in the ice bin when they are
removed by high pressure gas.
1. General maintenance and check list
- The user must install and use the product as mentioned in this manual.
- If you do not understand the installation procedure and safety instructions, contact
a service agency.
- For a long, trouble free life of your ice maker, maintain the ice maker
following the procedures below.
2. Checking the ice maker
- Be sure to turn off the power.
- To prevent water leaks, check all water and drain hose connections.
- Check that the evaporator is firmly connected to the body of the ice machine.
- For ventilation, maintain a 8" clearance around the ice maker.
- Be sure to clean the condenser filter on the front panel at least once a month.