User Manual

20
10. Reassemble in the reverse order.
※ Make sure to clean the product at least once a month.
1. Pull the air filter to the left and remove.
Clean with a vacuum cleaner and wash with
lukewarm water(
75 ℉
) or a mild detergent.
Completely dry the filter before reinserting
into the
grill.
※ Make sure to clean the product at least once a month.
[ How to clean air filter ]
Assemble the high water level sensor onto the front of the water trough
as in the figure below.
(Make sure that the top and bottom holes in the fixing clip are left open.)
Make sure that the top extended part of the water distribution cover goes
under the opposite surface.
Caution
Fixing holes
Water
distribution
cover
Front grille
Air filter
Caution
Warning
◆ Periodically clean the ice scoop.
◆ The ice scoop can be easily contaminated when handled.
◆ Detergent may cause a burn.
◆ Do not force/induce vomiting when someone has swallowed the detergent.
◆ Make them drink a lot of water or milk and seek medical help immediately.
◆ Rinse off with water if detergent comes in to contact with skin.
◆ Store the detergent away from children.