User Manual

14
1. Unpacking ice maker
- After removing the cardboard outer box from the ice
maker,
remove the provided parts from inside the ice
maker.
2. Installing the leveling feet
- Install the 4 height adjustable feet onto the bottom of
the ice maker.
3. Adjusting the level
- Turn the feet to set the level and use the front feet to
maintain evenness.
4. Connecting water piping
- Too high a temperature of the ice making water will decrease the amount of ice produced.
Too low a pressure will prevent ice from being made at all. Install an auxiliary pressure
pump in this case.
How to install
Appropriate water temperature Water pressure
Appropriate piping
/ hose size
Ice making water supply 50 ~ 90 ℉
20 ~ 80 psi
3/8" MPT
Ice making water drain - -
3/4" MPT
Ice making water supply
inlet (3/8" FPT)
Ice making water drain
(3/4" FPT)