User Manual

8
Warning
For cleaning and maintenance, remove the power plug from the
outlet and close the water supply valve. Perform work only after the
ice maker stops ice production.
- It may cause an electric shock or injury
Be sure to clean the condenser filter at least once a month.
- When dust collects on the condenser filter it will restrict ventilation, which may cause low
machine performance, excessive power consumption, and machine failure.
Install the machine in an area where the temperature is between
50-100
℉
.
- If temperature is 50
℉
or below, it may cause freezing and product failure.
- If temperature is above 100.
℉
, it may cause product failure.
Use the machine when the water pressure is between 20-80psi,
the water temperature is between 50-90
o
F and the ambient
temperature is between 50-100
o
F.
- If used outside these parameters it may cause slow ice production and/or product failure.
When installing the machine, be sure to connect to the cold water
supply.
- If you connect to the hot water supply, it may cause product failure.