User Manual

23
24
Inspection Items
- This icemaker includes an ice bin as part of the unit.
- When the ice level reaches the limit, the automatic sensor
stops the ice making operation.
- When ice is removed from the ice maker, the automatic
sensor starts the ice making operation so new ice will be
made.
- This ice maker operates automatically.
Sensor system
1. Bin full sensor
2. Ice thickness sensor
3. To maintain the ice bridge thickness of 3.2
mm(0.12in), the height of the sensor is fixed by
factory default.
4. To make the ice thinner, rotate the control
counter-clockwise for adjusting the thickness.
5. To make the ice thicker, rotate the control screw
clockwise.If you rotate the control screw one full
circle, as shown in the figure(right), the sensor
moves in the arrow direction and the ice thickness
is adjusted by 0.7mm(0.03in).
6. Periodically clean the sensor parts.If not cleaned
the ice thickness may be uneven.
Wire
Bracket
Sensor
Ice
Sensor
Bridge
Control Screw
Caution
Be careful not to damage the ice thickness sensor or to limit the sensor movement.