User Manual

22
23
Ice Making and Detachment Operations
◆ Once the ice has formed on the evaporator, the ice
thickness sensor activates to begin the ice harvest.
◆ The ice is detached from the evaporator using a
high temperature gas and the ice is collected in the
ice bin.
Ice making evaporator
Ice sensor
Maintenance
1. General maintenance and check list.
- The user must install and use the product as mentioned in this manual.
- If you do not understand the installation procedure and safety instructions,
contact your local service agent.
- To ensure a long and trouble free life cycle of your icemaker, maintain the
product according to the following procedures every month.
2. Checking the ice maker
- Be sure to turn off the power.
- To prevent water leaks, check all connections and hoses.
- For ventilation, do not place any other units near the ice maker.
- Be sure to clean the condenser filter on the front panel at least once a month.
3. Replacing the water filter
- Replace the water filter every six months or sooner depending on the quality of your water.
The ice maker will stop producing ice if the filter needs replacing.
- Replacement filters can be purchased from your dealer or the manufacturer.
Parts number 141-0812 (Always keep a spare to ensure continued ice production.)
Ice Making Operations